Обзор
Inconel 601 (UNS N06601 / Werkstoff 2.4851) is a nickel-chromium-iron solid-solution alloy containing approximately 60% nickel, 23% chromium, and 1.4% aluminum, with the balance being iron. The aluminum content combined with the high chromium level gives the alloy outstanding resistance to oxidation and other forms of high temperature corrosion, especially in cyclic thermal conditions. Inconel 601 is one of the standard workhorse alloys for service temperatures up to 1250 °C, providing excellent mechanical properties,goodmetallurgical stability, and resistance to creep, stress-rupture, and thermal fatigue. The alloy is non-magnetic, readily fabricated, weldable by all conventional methods, and approved for use under ASME Boiler and Pressure
Описание (Английский)
Inconel 601 (UNS N06601 / Werkstoff 2.4851) is a nickel-chromium-iron solid-solution alloy containing approximately 60% nickel, 23% chromium, and 1.4% aluminum. The aluminum addition combined with the high chromium content gives the alloy outstanding resistance to oxidation, carburization, and sulfidation at temperatures up to 1250 °C, particularly under cyclic thermal conditions. The alloy retains excellent mechanical strength, creep resistance, and metallurgical stability across a wide temperature range, and resists chloride-ion stress-corrosion cracking. Inconel 601 is a standard workhorse material for industrial furnaces, heat-treating equipment, chemical process heaters, radiant tubes, and petrochemical components where long-term high-temperature performance is required.
Диапазон Размеров
- Plate:thickness 0.5 – 100 mm ,width ≤ 2400 mm,length ≤ 6000 mm
- Sheet:thickness 0.3 – 6.0 mm,width ≤ 1500 mm
Спецификация Марки
| Система | Значение |
|---|---|
| american | ASTM B168/AMS 5715 |
| european | EN 10095 |
| German | DIN 17750 |
| AFNOR | NF A49-181 |
| Russian | GOST 24982 |
| Japan | JIN G4902 |
Химический Состав
| Элемент | Значение |
|---|---|
| C | ≤0.1 |
| Mn | ≤1 |
| Si | ≤0.5 |
| P | ≤0.03 |
| S | ≤0.015 |
| Cr | 21-25 |
| Cu | ≤1 |
| Fe | Ba |
| Ni | 58-63 |
| Al | 1-1.7 |
| Ti | ≤0.5 |
| Nb | ≤0.2 |
| N | ≤0.05 |
Механические Свойства
| productCenter.property | Значение |
|---|---|
| Tensile strength (Rm | 600–750 MPa |
| Yield strength (Rp0.2) | 240–345 MPa |
| Elongation at break (A50mm) | 30–45 % |
| Reduction of area | 50–65 % |
| Brinell hardness | 150–180 HB |
| Rockwell B hardness | 80–90 HRB |
| Charpy V-notch impact (20 °C) | 130 J |
Физические Свойства
| Свойство | Единица | Значение |
|---|---|---|
| Density | g/cm³ | 8.11 g/cm³ |
| Melting Range | °C | 1320 – 1370 °C |
| Solidus | - | 1320 °C |
| Liquidus | - | 1370 °C |
Применение
- Industrial furnaces — radiant tubes, muffles, retorts, fans, burner nozzles
- Heat-treating fixtures and baskets
- Chemical process equipment — heaters, condensers, evaporator tubes
- Petrochemical — catalyst supports, reformer components
- Power generation — superheater supports, ash handling
- Pollution control — waste incineration, flue gas desulfurization
- Glass, cement, and ceramic industry kilns
- Aerospace — turbine seals, combustion cans, afterburner liners
- Automotive exhaust systems and catalytic converter substrates
- Nuclear — fuel element dry storage containers
- Heat shields, recuperators, and waste-heat recovery
- Sulfur-containing atmosphere process equipment